Description
A member of ETC’s Unison Echo family of lighting-control and power-control products, the Echo Station Power Supply provides EchoConnect power for stations, responsive controls and power controllers. Echo Station Power Supplies are designed for use with distributed Echo Control Systems, Unison DRd Power Enclosures with Echo control, Echo Relay Panels and Sensor3 Power Control Systems
E-SPM-RM ECHOCONNECT POWER SUPPLY
EchoConnect: Provides 16U of control power and 16U of Output Power
Auxiliary Power: Not Provided
FEATURES
• Designed for use with any EchoConnect-enabled station, responsive controls or Echo power controllers
• EchoConnect: Two-wire, topology-free system gives you the freedom to put stations where you need them
• Multiple form factors and mounting options available
• Plug and play: ready to go out of the box with no software or programming required
SYSTEM LIMITATIONS
• Up to 1640 feet (500 meters) of control wiring
• DRd, Wall-, Rack- and DIN Rail Mount:
– Up to 16 stations and responsive controls
– Up to 16 power controllers or panels
• Echo Station Power Supply
– Up to six stations and responsive controls
– Up to six power controllers or panels
ECHOCONNECT POWER SUPPLIES
MODEL/DESCRIPTION
E-SPS Echo Station Power Supply, Knockout Mount
E-SPM-WM Wall-Mount Station Power Module
E-SPM-RM Rack-Mount Station Power Module
E-SPM DRd Station Power Module
E-SPM-WM-A Wall-Mount Station Power Module with 24V Aux
E-SPM-RM-A Rack-Mount Station Power Module with 24V Aux
E-SPM-A DRd Station Power Module with 24V Aux
E-APS 24V Aux Power Supply, Knockout Mount
E-SPS-DIN DIN Rail Mount Station Power Supply with 24V Aux
ORDERING INFORMATION
Compatible Interfaces
MODEL DESCRIPTION
EACC EchoAccess Interface
EDMXC Echo DMX Scene Controller
EEI Echo-Echoflex Interface
EEB Echo Expansion Bridge
SPECS
FUNCTIONAL
• Provides EchoConnect power for up to 6 or16 stations or Responsive Controls and 6 or 16 power controllers or panels
• Supports 1640 feet (500 meters) of control wiring
MECHANICAL
• Echo Station/Auxiliary Power Supply
– Mounts using half-inch conduit knockout
– Constructed of injection-molded ABS plastic
• DRd, Wall and Rack Mount:
– 18-gauge formed steel construction
– Fine-texture, scratch-resistant, epoxy paint
– Convection cooled
– Fully contained plug-in module with no discrete wire connections (DRd only)
– Front panel status indicators
– Wall-mount and 19-inch rack-mount variants available
• E-SPS-DIN – DIN Rail mounting complies with DIN43880 (35/7.5 rail)
ELECTRICAL
• DRd Enclosure Mount :
– 100V-277V, 50/60Hz, two-wire+GND power input
• Wall and Rack Mount, E-SPS, E-APS and E-SPS-DIN – 100V-240V, 50/60Hz, two-wire+GND power input
• Optional 24V Aux power options for connected devices
• EchoConnect two-wire control network utilizing low-voltage Class 2 wiring
• Topology-free and polarity-independent wiring over Belden 8471 or equivalent and one #14 ESD drain wire
• Wiring may be bus, loop, homerun or any combination of these
• Up to 1640 feet (500 meters) of control wiring per system
• Supports optional Cat5 or better wiring using Belden 1583A or equivalent
– Requires optional Cat5 termination accessories
• E-SPS-DIN includes 24v power supply
• UL and cUL LISTED
• CE Marked (Except E-SPS and E-APS)
THERMAL
• E-SPS, E-APS and E-SPS-DIN:
– Ambient room temperature: 0-50°C / 32-122°F
– Ambient humidity: 5-95% non-condensing
• DRd, Wall- and Rack-Mount
– Ambient room temperature: 0-40°C / 32-104°F
– Ambient humidity: 10-90% non-condensing
